Switching Systems

Single Manual Portable Switch Control Unit

When portability is key, these Single Manual Portable Switch Control Units are an essential item. Simple to use, the switch control unit can be plugged into any 13amp socket and in turn any mains powered equipment can be plugged into the unit. Most switches can be used with this unit and the equipment can be controlled in any of the four modes.

Single Radio Remote Portable Switch Control Unit

Working identically to the manual units however, these units can be controlled by plugging any switch into a small radio transmitter enabling equipment to be activated without the need for cabling up to 20 metres away. Any number of control units can be used with any number of transmitters and they will not get confused. In addition these units can be used manually.

Single Radio Remote fixed Switch Control Points (for room installations)

Just as the radio remote portable switch control units, these fixed units can be used with transmitters or manually (or both at once), however they are hard-wired in for fixed installation.

2 Channel Manual Portable Switch Control Unit

As with the Single Manual Portable Switch Control Unit, the 2 Channel units are simple to use. The switch control unit can be plugged into any 13amp socket and in turn any mains powered equipment can be plugged into the unit. Most switches can be used with this unit and the equipment can be controlled in any of the four modes.

2 Channel Radio Remote Switch Control Unit

A 2 Channel version of the single radio remote switch control unit, these units can be controlled by plugging any switch into a small radio transmitter enabling equipment to be activated without the need for cabling up to 20 metres away. Any number of control units can be use with any number of transmitters and they will not get confused. In addition these units can be used manually.

4 Channel Radio Remote Portable Switch Control Unit

A 4 Channel version of the single radio remote switch control unit, these units can be controlled by plugging any switch into a small radio transmitter enabling equipment to be activated without the need for cabling up to 20 metres away. Any number of control units can be use with any number of transmitters and they will not get confused. In addition these units can be used manually.

Multi-Channel Radio Transmitter

A transmitter is required to activate equipment remotely. Any transmitter can be used with any radio remote unit; it is not necessary to have a dedicated transmitter for each one. Simple to use this Multi Channel Radio Transmitter enables the use of one switch for any single channel from 1 to 99.

How does it work? Set the mode and the time on the switch control unit; set the two-digit number on the transmitter to match that on the switch control; plug any switch in and its ready to use. used with this unit and the equipment can be controlled in any of the four modes.